Side-Power SE210/250TC, 24V, Twin Props Counter-Rotating, 440 lbs Thrust

Side-Power SE210/250TC, 24V, Twin Props Counter-Rotating, 440 lbs ThrustThe 210/250TC is designed for yachts from 55-78′ loa. It’s large, 13.15HP motor and robust gearing generate from 462 (@ 21V) to 550 lb (@ 24V) of thrust – all in only a 10″ tunnel diameter. Like all other Sidepower units, it is loaded with safety features and has a wide range of accessories available to customize any installation to each owner’s individual requirements.Specifications:Thrust @ 21VDC462 lb (210 kg)Thrust @ 24VDC550 lb (250 kg)Approx. Boat Size55-78′ (17-24 m)Power13.15 hp (10 kw)Recommended Fuse Size500 Amps (SMANL500)Minimum Battery Capacity1235 CCA SAEFuse Size500 AmpApproximate Ship Weight (lbs)149Features:The gearhouse / drive legs of most Sleipner DC Electric thrusters are now fully galvanically isolated / separated from the electric motor and motor bracket. This ensures that even if there is an accidental short circuit or a current leak for other reasons, the immersed parts are not effected as they could be with direct electric contact.Achieved by composite bushings around the bolts and beneath the washers and a bushing in the motor bracket electrically isolating the drive housing from the motor bracket.Available on DC electric models with flexible couplers only, where the flexible coupler provides galvanic separation of the motor and gearleg shaft.Sealed drive lubricationSealed gearleg with long-life “mechanical” seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.”Mechanical” seals with surfaces of ceramic and carbon for ultimate security against water intrusionTwin PropellersTwo counter-rotating propellers can give the most thrust at a good performance ratio in a minimal tunnel diameter. This system is used in our larger thrusters for maximum power. The TC models are the favourite thrusters among leading boatbuilders for their high-end yachts.Q-propellerThe new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Sleipner propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.Noise reductions of up to 75% measured in controlled environmentsThe expected and tested normal noise reduction in average installations: 20-40%Will be delivered on all Sleipner models except models with 300mm and 385mm tunnel diameterUpgrade kits are available for most SP series thrusters with special adaptorsIntelligent power controlThe Sleipner unique thruster controller that intelligently protects the thruster from potential inherent problems in all high current applications as well as user faults. It includes several important safety features imperative in a product with such high power, run by DC electrics, as a thruster.Provides delay between drive directionsMonitors solenoid functions to reduce the chance of solenoid lock-inWill stop the thruster in case of a lockedin solenoid, without extra user action and even without controlling a main switch.Mesurements:MeasurementsValue(H) Height480mm / 18.90in(L) Length274mm / 10.79in(W) Width337mm / 13.27in(ID) Internal Diameter250mm / 9.84in(WD) Water Depth250mm / 9.84in(TL) Recommended Tunnel Length323mm / 12.72in(TL min.) Minimum Tunnel Length273mm / 10.75in(T min.) Minimum Tunnel Wall Thickness7mm / 0.28in(T max.) Maximum Tunnel Wall Thickness9mm / 0.35inStern MeasurementsValue(L) Internal Leng